Epson Stylus Color 400 User's Guide

Quick SetupRemove any packing material from the printer, as described onthe Notice Sheet in the box. Save all the packaging so you canuse it if you ne

10Windows 3.11. Make sure Windows Program Manager is running and theprinter is on. Exit any open applications.2. Insert the EPSON printer software CD-

11Your EPSON Stylus COLOR 400 User’s Guide tells you how to:◗ use the printer software◗ load special paper or other media◗ use the printer’s control p

EPSON and EPSON Stylus are registered trademarks of SEIKO EPSON CORPORATION.General Notice: Other product names used herein are for identification pur

Insert the paper support in the top slot on the back of theprinter.Attach the Paper SupportCaution:Do not plug the printerinto an outletcontrolled by

1. Lower the output tray and raise the printer cover.2. Press the power button to turn on the printer. The powerlight flashes, the and

5. Lower the ink cartridges into their holders with the labelsface up and the arrows pointing toward the back of theprinter.black inkcartridgecolor in

1. Slide the left edge guide all the way left and pull out theoutput tray extension.2. Fan a stack of plain paper and then even the edges.3. Load the

Connect the Printer to Your Computer1. Turn off the printer.2. While holding down the load/eject button, turn on theprinter. Then release the but

Install the Printer SoftwareNow you need to install the printer software for Windows® 95or Windows 3.1 from the EPSON printer software CD-ROM.If you d

8Try this plug-and-play procedure to install your printer software.If it doesn’t work, try the other Windows 95 procedure onpage 9.1. Turn on the prin

91. Make sure Windows 95 is running and the printer is on.Exit any open applications.2. Insert the EPSON printer software CD-ROM (or diskette 1)in you