
Epson Stylus Photo PX650/TX650/TX659/PX660/PX660 Premium/Artisan 635 Revision C
DISASSEMBLY AND ASSEMBLY Removal of Exterior Parts 67
Confidential
4. Pull out the hinge of the Scanner Unit on the left side.
5. While keeping the Scanner Unit open at 45 degrees, push it in the direction of the
arrow as shown in Fig. 4-12 to remove the Scanner Unit from the right hinge.
Figure 4-12. Removing the Upper Housing (2)
6. While holding the Scanner Unit, remove the screws (x7) that secure the Upper
Housing.
Figure 4-13. Removing the Upper Housing (3)
7. Put the Scanner Unit on the Upper Housing.
8. Pull the Panel Unit forward, and release the hooks (x2) on the both sides under the
Panel Unit.
Figure 4-14. Removing the Upper Housing (4)
When removing the Scanner Unit from the printer, be careful not
to damage the cables of the Scanner Unit connected to the printer.
Push Scanner Unit toward the rear
along the angle of rib to remove groove
of Scanner Unit from the right hinge.
Pull out hinge
Scanner Unit
C.B.P. 3x10 (6±1 Kgfcm)
1
2
3
4
5
6 7
Upper Housing
Do not use these screws holes (x3).
Left side under Panel Unit
Right side under Panel Unit
Hook
Panel Unit
Be careful not to
damage cables
Upper Housing
Scanner Unit
Comments to this Manuals