Epson 1500 User Manual download pdf (Page 112)

With INDIVIDUAL mode, a separate area of memory is

defined for each channel. If you define more than two channels

with the INDIVIDUAL setting or if you use one of the optional

identity cards with either mode, you have to add more

memory. See Chapter 5, “Options,” in this manual for

information on adding memory.

AUTOSENSE is less complicated and requires less total

memory, but in the unlikely event that files sent from two

different computers at the same time interfere with each other,

try the INDIVIDUAL setting.

Using AUTOSENSE

Menu/submenu

Available options

USER

+AUTOSENSE

SET AUTOSENSE

INDIVIDUAL

Press

to choose AUTOSENSE or INDIVIDUAL. New

settings for the USER option take effect only when exit

SelecType and then use the

INITIALIZE

button. See “Buttons,” in

Chapter 1.

Assigning memory in /ND/V/DUAL mode

If you select INDIVIDUAL, the next step is assigning memory

to each channel. Any channel using the LJ-2P, 3/P/Si, LQ, FX,

or GL/2 printer emulation requires at least 0.5MB of memory,

and any channel using the PostScript or Epson GL identity card

requires at least 1.5MB. (Add the requirements of all three

channels together to determine the minimum total memory

required. If you need to add memory, see “The Memory Chip

Sets,” in Chapter 5.)

4-28 SelecType

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 271 272

No comments

Epson 1500 User Manual Page 112