Epson 777 User Manual download pdf (Page 26)

To avoid damaging the printer, never move the print head by hand.

You cannot print if either ink cartridge is empty. Leave the empty cartridge

installed in the printer until you have obtained a replacement. Otherwise

the ink remaining in the print head nozzles may dry out.

You must remove the yellow tape from the top of the cartridge or you will

permanently damage it. Don’t try to remove the clear seal underneath the

cartridge.

Don’t touch the green circuit board on the back of the cartridge; you may

inhibit normal operation and printing.

Determining Which Cartridge to Replace

To find out which ink cartridge is low or empty, do one of the following:

■ Check the information in the EPSON Status Monitor 3 (Windows) or EPSON

StatusMonitor (Macintosh) window that automatically appears on your screen

when you print.

■ Press the

e ink cartridge replacement button and check

the flash pattern of the control panel lights:

■

error and

Ppower lights flash at the same speed =

replace black cartridge

■

error light flashes twice as fast as the

Ppower

light = replace color cartridge

Removing and Installing Ink Cartridges

Be sure you have a new ink cartridge before you begin. Once you start the ink

cartridge replacement procedure, you must complete all the steps in one session.

Follow these steps to replace ink cartridges:

1. Make sure the printer is turned on and not printing (the

Ppower light should be

on, but not flashing), then open the printer cover.

2. Press the

e ink cartridge replacement button. The print head moves to the center

and the

Ppower light flashes and the

error light flashes or remains on. (If you

need to determine which cartridge to replace, check the status monitor window or

the control panel light pattern now, as described above.)

power lighterror light

1 ... 25 26 27 ... 53

No comments

Epson 777 User Manual Page 26