Epson WORKFORCE 320 SERIES User Manual download pdf

Start Here

3 Squeeze the edge guide as you slide it all the way to the

left.

Tip: If the clear plastic feeder guard is in the way, move it

forward.

4 Load letter- or A4-size paper against the right edge and

behind the tab, with the printable side face up.

5 Slide the edge guide over.

Connect the phone cord

To fax, connect the included phone cord to a telephone wall

jack and to the LINE port on your product. To connect a

telephone or answering machine, see the Quick Guide.

Note: If you’re connecting to a DSL phone line, you must use a DSL

filter or you won’t be able to fax. Contact your DSL provider for the

necessary filter.

Read these instructions before using your product.

Unpack

French control

panel stickers

(included for

Canada only)Power cordPhone cord

Caution: Do not open ink cartridge packages until you are ready to

install the ink. Cartridges are vacuum packed to maintain reliability.

Remove all protective materials.

Turn on

1 Connect the power cable.

Caution: Do not connect to your computer yet.

2 Press the On button.

Select settings

1 To select English as your language, press OK.

(If you want to change the language, press or to

select it, then press OK.)

2 Select your Country/Region and press OK.

3 Select the current Daylight Saving Time setting (Winter

or Summer) and press OK.

4 Select the Date format and press OK.

5 Press the number keys to enter the Date and press OK.

6 Select the Time format (12h or 24h) and press OK.

7 Press the number keys to enter the Time. Then press

or to select AM or PM, if necessary.

8 Press OK.

Install ink cartridges

Note: Do not load paper yet.

1 Lift up the scanner.

2 Open the cartridge cover.

3 Shake the ink cartridges gently 4 or 5 times, then unpack

them.

4 Remove only the yellow tape from each cartridge.

Caution: Don’t remove any other seals or the cartridges may

leak.

5 Insert the cartridges in the holder for each color.

6 Press each cartridge down until it clicks.

7 Close the cartridge cover. Press down until it clicks.

8 Lower the scanner.

9 Press the OK button to charge the ink.

Priming takes about 2½ minutes.

Note: Your printer ships with full cartridges and part of the ink

from the first cartridges is used for priming the printer.

Caution: Don’t turn off the printer while it is priming or you’ll

waste ink.

Load paper

1 Open the paper support and pull up the extensions.

2 Pull out the output tray extensions and raise the stopper.

*411867400*

WorkForce

320 Series

1 2 3 4

Summary of Contents

Page 1 - *411867400*

Start Here3 Squeeze the edge guide as you slide it all the way to the left. Tip: If the clear plastic feeder guard is in the way, move it forwar

Page 2

Start Here3 Squeeze the edge guide as you slide it all the way to the left. Tip: If the clear plastic feeder guard is in the way, move it forwar

Page 3 - Any questions?

5 Mac OS® X 10.4 only: When you see this screen, click Add Printer & Fax. Follow the steps on the right side of the screen to add your printer.

Page 4

5 Mac OS® X 10.4 only: When you see this screen, click Add Printer & Fax. Follow the steps on the right side of the screen to add your printer.

Comments to this Manuals

No comments

Epson WORKFORCE 320 SERIES User Manual

Browse online or download User Manual for Printers Epson WORKFORCE 320 SERIES. Epson WORKFORCE 320 SERIES User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Printers Epson WORKFORCE 320 SERIES