Epson 9000i - PowerLite SXGA LCD Projector Owner's Manual download pdf (Page 48)

■

■ ■ ■ ■

Connecting the Audio Cable

1. If you will be using audio, connect one end of the audio

cable to the Audio 1 jack on the projector. (Use the Audio

2 jack if you are connecting a second computer.)

2. Connect the other end of the audio cable to the audio-out

port on your PowerBook.

♦

Note:

After you turn on the projector and computer, you’ll need

to choose Mirroring in the Display Control Panel if you set up

your configuration to display on the LCD screen as well as the

projector screen.

Connecting to a High-End Workstation

The EMP-7350/7250/5350 are capable of remapping input

resolutions up to 1280 × 1024 pixels. Since 1280 × 1024

pixels is the default resolution for most leading workstations,

this capability makes these projectors the best portable

solution for the display of workstation video output.

There is no standard for workstation video output. Those

workstations that follow the SXGA standard and use the

HD15 connector don’t need an adapter cable. The most

popular workstations use a 13-pin 13W3 connector, which

requires an adapter cable. Ask your dealer.

Audio 1 jack

audio cable

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 127 128

No comments

Epson 9000i - PowerLite SXGA LCD Projector Owner's Manual Page 48