Epson 1250 - Perfection Photo Flatbed Scanner Service Manual download pdf (Page 31)

EPSON Perfection 1250/1250 PHOTO Disassembly and Assembly

4.2.2 Document Cover

1. Open the document cover.

2. Holding it by its edges, lift the document cover straight up to remove it.

Figure 4-3. Document Cover Removal

Figure 4-4. Document Cover Removal

4.2.3 Upper Cover Removal

Preparation:

Remove the document cover as described in the previous section.

Move the carriage lock to the locked position as described in Carriage

Lock Release

on page 30.

1. Remove two screws (CBP, M3x8) from the rear of the scanner.

2. Disengage the six hooks at the left and right of the cover (use a flat-tipped

screwdriver or similar tool to work the cover upward), then lift the back of

the upper cover and push it forward to remove it.

Figure 4-5. Upper Cover Removal - Remove Rear Screws

Document Cover

C A U T I O N

" When removing the upper cover, make sure that the

hooks are fully disengaged and that the tabs do not get

broken.

" The edges of the metal shields are sharp, so be careful

during disassembly and reassembly.

CBP (M3x8) screws

1 ... 30 31 32 ... 58

No comments

Epson 1250 - Perfection Photo Flatbed Scanner Service Manual Page 31