Epson Expression 1680 User Manual download pdf (Page 26)

Setting Up Your Scanner

Connecting to a SCSI Interface

Before you connect the scanner, you must have an ASPI-compliant SCSI 2

interface board installed in your computer (Adaptec SCSI 2 interface boards are

recommended). Some computers come with a SCSI 2 board preinstalled; check your

computer documentation.

Adaptec Power Domain 2940UW and 2940U2W SCSI boards for the

Macintosh are designed for hard drives and are not compatible with

scanners.

If you purchased a SCSI board as an option, follow the manufacturer’s instructions to

install both the board and its driver.

You may also need to change the

scanner’s SCSI ID setting before you

connect it to your computer. If you have

another SCSI device that uses SCSI ID 2,

turn the scanner off and turn the SCSI

ID switch on the back of the scanner to a

new number.

Choose a number that doesn’t conflict with the ID number of other SCSI

devices. Don’t use SCSI ID 0, 1, or 7. If your Macintosh has a built-in

CD-ROM, don’t use SCSI ID 3.

Follow these steps to connect the scanner to a SCSI interface:

1. Make sure the scanner and computer are turned off. (The scanner is off when the

P Operate button is out and the

ERROR

and

READY

lights are off.)

Do not connect the scanner to the computer while it is turned on, or the

scanner could be damaged.

SCSI ID switch

1680.book Page 19 Thursday, March 1, 2001 4:28 PM

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 158 159

No comments

Epson Expression 1680 User Manual Page 26