Epson PowerLite 400W User's Guide download pdf

Quick Setup

4 Connect your video source

Connect the projector to a computer or video source using any of the available

connections shown below.

•

Check the connectors on your video equipment. If more than one

connection is available, choose the one that provides the best quality.

The projector connectors from highest to lowest quality are

Computer (Component Video), S-Video, and Video (Composite Video).

•

A VGA computer cable is included. You can purchase optional video

and audio cables through Epson or an electronics store.

•

You can connect up to 4 video devices and use the remote control to

switch between them.

NOTE

You can also connect an external monitor to simultaneously watch

the display on your computer monitor (when the computer cable is

connected to the Computer1 port). To enhance the sound in your

presentation, you can connect external speakers. To monitor or

control the projector over a network, you can connect a network

cable. See the User’s Guide on your CD-ROM for instructions.

3 Choose a location

You can set up the projector in a variety of ways. The projector’s short-throw

lens leaves plenty of room for your audience and allows you to present

comfortably in front of them without casting a shadow on the screen.

To install the projector in a classroom or

other setting, you can mount the projector

to a wall or compatible whiteboard using

an optional Epson

wall mounting system.

Using an interactive whiteboard, you can

even control your computer presentation

by touching the projected display on the

board surface.

If you’ll need to take the projector from

place to place, you can set it up on a table

in front of the screen.

You can also mount the projector from the ceiling and/or project from the

rear using a translucent screen. If you project upside-down from a wall or the

ceiling, or from the rear, you’ll need to select the correct projection option in

the projector’s Extended menu. See the User’s Guide on your CD-ROM for

instructions.

The distance between the projector and the screen determines the size of the

image, and can vary depending on the aspect ratio (width-to-height ratio) of

the image and your screen. Ideally, you should place the projector between

26 and 48 inches from the screen or whiteboard. Be sure to include the slight

offset from the center of the projector’s lens to the edge of your image.

Here are the approximate distances and offsets you should use in placing the

projector for images displayed in the projector’s native 16:10 aspect ratio:

To calculate the distance and offset for 4:3 or 16:9 aspect ratio images or

projection surfaces, see the User’s Guide on your CD-ROM. (For more help

determining the size of your image, use the Image Size Calculator on the

Multimedia Projectors page on Epson’s website.)

Turn over

PowerLite

400W

1 Unpack the projector

You should have the following items:

Remove the protective pad from the lens cover and save it for transporting

the projector.

Avoid touching the lens with your bare hands to prevent damage

to the lens surface.

2 Set up the remote control

1 Remove the battery cover.

2 Insert the batteries.

3 Replace the battery cover.

Projector and lens cover

Power cord

Computer cable

Projector

CD-ROMs

Password protected

sticker

Remote control

and batteries

RCA video cable

(composite video)

(optional)

S-Video

cable

(optional)

Component

video to

VGA cable

(optional)

VGA Computer

cable

(included)

L-Audio-R

ports

Audio2 and Audio1 ports

*411327900*

16:10 aspect ratio

1 2 3 4 5 6

Summary of Contents

Page 1 - Set up the remote control

Quick Setup4 Connect your video sourceConnect the projector to a computer or video source using any of the available connections shown below. • Check

Page 2

Quick Setup4 Connect your video sourceConnect the projector to a computer or video source using any of the available connections shown below. • Check

Page 3

Quick Setup4 Connect your video sourceConnect the projector to a computer or video source using any of the available connections shown below. • Check

Page 4 - Plug in and turn on

Where to get help Internet support Visit Epson’s support website at epson.com/support and select your product for solutions to common problems. Y

Page 5

Where to get help Internet support Visit Epson’s support website at epson.com/support and select your product for solutions to common problems. Y

Page 6

Where to get help Internet support Visit Epson’s support website at epson.com/support and select your product for solutions to common problems. Y

Comments to this Manuals

No comments

Epson PowerLite 400W User's Guide

Browse online or download User's Guide for Serial switch boxes Epson PowerLite 400W. Epson PowerLite 400W User`s guide User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Serial switch boxes Epson PowerLite 400W