Epson TWAIN PRO Network Setup Guide download pdf (Page 27)

2-8

Setting Up the Scanner

Installing a SCSI interface board

Follow the instructions in this section to install a SCSI board and

SCSI software in your computer. You should do this before

installing the scanner driver and software applications.

If you already have a SCSI board installed in your PC or

Macintosh, go to the next section.

Note:

For additional information, see the installation guide that comes with

your SCSI board.

1. Turn off the computer and any peripheral devices. Unplug

any power cords, then disconnect all cables from your

computer.

2. Remove the cover from your computer.

Caution:

Static electricity can damage electronic components.

Discharge static electricity by touching the metal frame of

your computer before handling the interface board or any of

the computer’s circuit boards.

3. Insert the interface board into an appropriate expansion slot,

then secure it with the retaining screw.

4. Replace the computer cover and reconnect all cables.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 116 117

No comments

Epson TWAIN PRO Network Setup Guide Page 27