Epson PC3000Z User Manual download pdf (Page 15)

Connecting to a PC

Follow these steps to connect the camera to a PC:

1. Make sure the camera and your computer are turned

off. Also make sure the LCD monitor is turned off.

2. Locate a serial port on the back of your computer. You

may have two serial ports labelled COM1 and

COM2, or with icons. If you have two serial ports

available, use port 1 to connect your camera.

3. Line up the serial connector on the cable with one

of the serial ports on your computer, and insert the

connector. Then tighten the screws.

4. Open the connector cover on the side of the camera.

5. Depending on the type of cable you have, line up

either the arrow or the flat surface of the cable

connector with the mark on the camera’s serial port.

Then insert the connector.

serial cable

(long cable)

serial port on computer

connector cover

mark

flat surface

arrow surface

EPSON Photo!2 Rev.C

A5 size Chapter 2

5/8/98 pass 0

2-2

Using EPSON Photo!2

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 56 57

No comments

Epson PC3000Z User Manual Page 15