Epson PowerLite 5600p User's Guide download pdf (Page 68)

Maintaining and Transporting the Projector

6. Insert the new lamp as shown.

7. Make sure the lamp is fully seated, then tighten its screws.

8. Replace the lamp cover and tighten its screw securely. (The

projector won’t come on if the lamp cover is loose.)

9. Reset the lamp timer as described in the following section.

Resetting the Lamp Timer

After installing a new lamp, you need to reset the timer so the

projector can keep track of how many hours it has been used. Follow

these steps:

1. Plug in the projector and turn it on (see page 22).

2. After the projection lamp comes on, press the

Help

button and

hold it down for at least 5 seconds.

You see the Help menu, and then the following message:

caution

Do not touch the glass

ortion of the lamp assembly.

Touching the glass could

result in premature lamp

ailure.

Reset Lamp ON Time

Do you reset the Lamp ON Time?

Yes No

:Select :Execute

5600 and 7600.book Page 62 Thursday, December 14, 2000 2:46 PM

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 113 114

No comments

Epson PowerLite 5600p User's Guide Page 68