Epson PowerLite 5600p User's Guide download pdf (Page 77)

Solving Problems

The image isn’t square, but trapezoid-shaped.

■

Make sure the projector isn’t placed off to one side of the screen,

at an angle. Place the projector directly in front of the center of

the screen, facing the screen squarely.

■

If you’ve tilted the projector upward by extending the legs, the

image will be broader at the top. Hold down the

–

side of the

Keystone

button on top of the projector until the image is

square.

The image contains static or noise.

■

If you’ve connected a second computer or you’re using

component video, make sure the

BNC

option in the Setting menu

is correct. See page 54.

■

If you’re using a computer cable longer than 6 feet, the image

quality may be reduced.

■

Keep your computer and video cables separated from the power

cord as much as possible to prevent interference.

■

The video signal may be split between the computer and the

projector. If you notice a decline in the projected image quality

when the image is displayed simultaneously on your laptop

computer and the projector, turn off the laptop’s LCD display.

The image is blurry.

■

There may be dirt or smears on the lens. Clean the lens as

described on page 58.

■

Adjust the focus using the focus ring.

■

Adjust the

Sharpness

setting in the Video menu (see page 46). If

you’re projecting from a computer, you may also need to adjust

the

Tracking

and

Sync

as described in the next section. If you

don’t like the new settings, you can always select

Reset

to return

to the factory default settings.

5600 and 7600.book Page 71 Thursday, December 14, 2000 2:46 PM

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 113 114

Comments to this Manuals

No comments

Epson PowerLite 5600p User's Guide Page 77

Comments to this Manuals

Related products and manuals for Data projectors Epson PowerLite 5600p