Epson 9700 User Manual download pdf (Page 39)

Making Detailed Adjustments 39

■ Block NR (Pro Cinema 9700 UB only)

Note: This setting cannot be used when the Color Mode is set to x.v.Color (see page 28) or

with a signal input through the PC port.

This setting reduces block noise that can appear when projecting MPEG images that have

been compressed at a low bit rate.

■ 2-2 Pull-down (Pro Cinema 9350 only)

Note: This setting can be used only when viewing a 1080p/24Hz signal input through the

Component, HDMI1, or HDMI2 ports (see page 67). This setting cannot be used when the

Color Mode is set to x.v.Color (see page 28) or with a signal input through the PC port.

This setting allows you to select whether images are projected with 2-2 pulldown

detection or 2-3 pulldown detection. Select

On for 2-2 pulldown detection.

■ 4-4 Pull-down (Pro Cinema 9700 UB only)

Note: This setting can be used only when viewing NTSC, M-PAL, or PAL60 signals input

through the Video or S-Video ports, or 480i, 1080i/60Hz, or 1080p/24Hz signals input through

the Component, HDMI1, or HDMI2 ports (see page 67). This setting cannot be used when the

Color Mode is set to x.v.Color (see page 28) or with a signal input through the PC port.

This setting allows you to select whether images are projected with 4-4 pulldown

detection or 2-3 pulldown detection. Select

On for 4-4 pulldown detection.

■ Frame Interpolation (Pro Cinema 9700 UB only)

This setting compares the current and previous frames, then creates a frame between

them to reduce fuzziness and produce clearer moving images. You can select from 3 levels

of frame interpolation.

Note: This setting cannot be changed while the 4-4 Pull-down setting is turned on.

Signal > Advanced > Block NR

Signal > 2-2 Pull-down

Signal > 4-4 Pull-down

Signal > Frame Interpolation

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 79 80

No comments

Epson 9700 User Manual Page 39