Epson 425Wi Installation Guide download pdf (Page 35)

English

14. Attach the wall plate cover

Secure the wall plate cover with a hexagonal wrench (M4) and three M4 × 12 mm hexagon socket head

cap bolts.

Depending on how the cables are wired, you may need to cut out parts of the wall

plate cover to allow the cables to be passed through it.

When cutting the thin section of the wall plate cover and passing the cables through,

make sure you smooth off any sharp edges to prevent damaging the cables.

Make sure you operate the cutter safely.

Wall plate cover

M4 × 12 mm hexagon socket

head cap bolt (×3)

Wall plate cover

Only a specialist should remove or reinstall the projector for maintenance and repairs. Refer to

the projector User’s Guide for instructions on maintenance and repairs.

Caution

❏ Never loosen the bolts and nuts after installation. Regularly confirm that the screws have

not become loose. If you find any loose screws, tighten them firmly. Otherwise, the

projector or wall mount may fall and cause personal injury or property damage.

❏ Do not hang on the wall mount or hang a heavy object on the wall mount. If the projector

or wall mount falls, it could cause personal injury or property damage.

Warning

Installation.book Page 35 Tues day, October 30, 2012 5:53 PM

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 71 72

No comments

Epson 425Wi Installation Guide Page 35