Epson LX-90 User Manual download pdf (Page 15)

Now, run the program by typing RUN and pressing

ENTER,

print your file or document by following the printing instructions of

your software. The LX-90 will print your example in standard single-

strike printing, as shown below:

This is an example of

LX-90 printing.

Now that you have created a sample, follow these steps to print it in

emphasized mode:

1. See that both the ON LINE and READY lights are on.

Press the

ON LINE

and

buttons at the same time. You hear a

beep to signal that SelecType is on.

3. As shown in Table 2-1, the code for emphasized is two. Therefore,

press the

ON LINE

button two times. (Remember to make sure

you hear a beep each time you press the

ON LINE

button when

you are in SelecType mode.)

4. Now that you have selected the emphasized mode, push the

button once to set it.

5. Push the

button once to return the panel to its standard opera-

tion .

6. Press the

ON LINE

button so the LX-90 is ready to print.

Now you have set the LX-90 to print in emphasized mode. Print

your sample once more. It should appear in emphasized mode just as

you see below:

This is an example of

LX-90 printing.

Turn off your printer to cancel the emphasized setting, and-if you

wish-try this exercise with other modes. If you are using commercial

software and SelecType will not change the typestyle, see “SelecType

Features” in Appendix E.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 99 100

No comments

Epson LX-90 User Manual Page 15