Epson ACULASER M8000 User Manual download pdf (Page 190)

Cause What to do

The Density setting may be too dark.

In the printer driver, click Extended Setting on the Optional

Settings tab, and then lighten the Density setting.

White dots appear in the printout

Cause What to do

The paper path inside the printer may be dusty. Clean internal printer components by printing three pages with

only one character per page.

Print quality or tone is uneven

Cause What to do

Your paper may be moist or damp. Do not store paper in a humid or damp environment.

The imaging cartridge may be near the end of its service

life.

If the message on the LCD panel or in EPSON Status Monitor

indicates that the imaging cartridge is near the end of its service

life, replace the imaging cartridge. See “Replacing Consumable

Products” on page 147.

For Windows users, you can also check the remaining service life

of the imaging cartridge by looking at the Basic Settings tab in

the printer driver.

There may be a problem with imaging cartridge. Replace the imaging cartridge. See “Replacing Consumable

Products” on page 147.

Half-tone images print unevenly

Cause What to do

Your paper may be moist or damp. Do not store paper in a humid or damp environment. Be sure to

use paper that is newly unwrapped.

EPSON AcuLaser M8000 Series User's Guide

Troubleshooting 190

1 2 ... 185 186 187 188 189 190 191 192 193 194 195 ... 247 248

No comments

Epson ACULASER M8000 User Manual Page 190