Epson R800 User Manual download pdf (Page 74)

74 Printing on CDs and DVDs

Adjusting the Print Density

If ink smears on your printed CDs or DVDs, you may need to adjust the color

saturation or ink density. Discs from different manufacturers absorb ink differently,

so you may need to adjust the density for each type of disc. Follow the instructions

here to print a color saturation check pattern and make adjustments as necessary.

Note: You can also use the Brightness and Contrast settings in Epson Print CD to

adjust color saturation. See page 66 for instructions.

Windows

1. Insert a test CD or DVD for printing, as described on page 63.

2. Start Epson Print CD.

3. Select Print from the File menu.

4. Click the Printer Settings button.

5. Make sure your printer is selected

and the Source is set to Manual,

then click OK.

6. Click the Print Density

Confirmation

Pattern button.

7. Click OK.

8. After the pattern is printed, select

Print from the File menu.

9. Examine the print and adjust the Print Color Correction slider to a lighter or

darker setting as necessary.

10. You can print three density patterns on one disc, each in a different location.

Insert the disc again and press the ) paper button. Then click the

Second

button and click

OK to print the second pattern.

If you print a third pattern, repeat steps 8 to 10, but select the Third button.

11. Remove the CD or DVD and let it dry for at least 24 hours. Then check the

saturation levels again.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 115 116

No comments

Epson R800 User Manual Page 74