Epson 4600 Service Manual Page 97

  • Download
  • Add to my manuals
  • Print
  • Page
    / 206
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 96
EPSON Stylus CX3500/CX3600/CX3650/CX4500/CX4600 Revision A
TROUBLESHOOTING Troubleshooting 97
Operation
•–
The leading edge of paper does not go
through between the EJ Roller Unit and
the Star Wheel.
EJ Frame Unit**
3. Check if the Star Wheel Holders does not come off. 3. Reassemble the Star Wheel Holders
correctly.
4. Check if the Spur Gear 36 is not damaged. 4. Replace the EJ Frame Unit with a new one.
The leading edge of paper is not loaded
to the PF Roller Unit.
Paper Guide Upper
Unit **
1. Check if the Paper Guide Upper Unit is correctly
assembled.
1. Reassemble the Paper Guide Upper Unit to
the Main Frame correctly.
* The Carriage Unit can move to home position even if the Torsion Spring 0.22 comes off. However, the PE Sensor Lever keeps the high signal condition in the next operation. Therefore, the paper
jam error is detected.
** In case that the paper jam error occurs in each operation, the jammed paper contacts the nozzle surface of the Print Head and the Print Head may be damaged.
Table 3-14. Check point for the paper jam error according to each phenomenon
Occurrence
timing
CR position
Detailed phenomenon
Defective
unit/part name
Check point Remedy
Star Wheel Holders
Paper Guide Upper Unit
Page view 96
1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 205 206

Comments to this Manuals

No comments