Epson EPL-N2700 Specifications Page 82

  • Download
  • Add to my manuals
  • Print
  • Page
    / 165
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 81
EPL-N2700 Revision A
Troubleshooting Overview 82
3.1.1.2 Message Descriptions
This section describes the messages specific to EPL-N2700.
x Error yyy (error)
Given when a problem occurs with the paper feeders or output bins.
<Remedy>
Power down temporarily, check the connection on the device where
the error has occurred and start-up again.
If the problems is not solved, there is a possibility of malfunction.
Check Duplex P-size (error)
Occurs when duplex printing cannot be done because the paper
size that has passed and the paper size selected for duplex printing
were deferent.
<Remedy>
Open the cover on the paper feed path and remove the jammed
paper, then close the cover.
If the problems is not solved, there is a possibility of malfunction.
Jam xxxx (error)
A paper jam has occurred at the indicated location. If more than one
locations are indicated, it means there is a possibility of jammed
paper near the indicated locations. Therefore, the numbers of
locations and the jammed paper do not match.
<Remedy>
Open the cover indicated, remove the jammed paper, and close the
cover.
Face-down Full (error)
The printer attempts to eject paper to the FD, but the FD was full.
Only occurs when the multibin or finisher is installed. (Does not
occur without any options installed.)
<Remedy>
After removing paper from the FD, press the Continue button, and
the printer resumes printing.
Multibin <N> Full (error)
The printer attempts to eject paper to the multibin <N>, but the bin is
full.
<Remedy>
After removing paper from the multibin, press the Continue button,
and the printer resumes printing.
Cover A - G Open (error)
Cover at the indicated position is open.
<Remedy>
Close the cover indicated.
Multibin is removed
10-bin multibin is not properly installed. The 10-bin multibin was
separated from the printer to open the door to remove the jammed
paper, and the 10-bin multibin is left separated from the printer.
<Remedy>
Install the 10-bin multibin to the printer main body.
Manual Feed ssss ttt (error)
When the manual feed mode is selected by the panel or command,
the selected paper source and paper size are indicated before
printing starts.
<Remedy>
Press the Continue button, and printing starts. If paper is loaded in
the selected paper source ssss, the printer feeds paper from that
paper source. If not, the printer feeds paper from the paper source
of the highest priority among the ones which hold paper. In case
Page view 81
1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 164 165

Comments to this Manuals

No comments