Epson LX-90TM Installation Manual download pdf (Page 48)

Always turn the power OFF (with the switch on the right side of the

printer) before you change the setting of any of these switches. Any

changes made while the power is on will be ignored until you turn the

printer off and back on. So set all switches with the power off.

In Table C-l we show you the functions of all the switches. Then we

explain each of them.

Table C-1. DIP switch functions

Switch 1

No.

Function

OFF

1-1

Compressed

Print mode

Standard

1-2

NLQ

Print mode

Draft

1-3

Active

Cut-sheet feeder Inactive

1-4

12 inches Page length

11 inches

1-5

Inactive Paper end detector

Active

1-6

Emphasized

Print mode Standard

1-7

Double-strike

Print mode

Standard

1-8

Device number

Switch 2

No. ON

Function

OFF

2-1 0 (slashed)

Zero character

2-2

Not used

2-3

Not used

2-4 Mute

Beeper

Active

Note:

The factory setting of all these switches is OFF:

Switch 1-1 selects standard or compressed printing. ON is com-

pressed; OFF is standard. Even if the switch is off, you can use

SelecType to choose compressed.

Switch 1-2 selects draft or Near Letter Quality printing. When it is

ON, the printer prints in the NLQ mode. When it is OFF, it prints in

the draft mode. If the switch is off, you can still choose the NLQ mode

with SelecType.

Switch 1-3 controls the optional cut-sheet feeder. Leave it off unless

you are using a cut-sheet feeder.

Switch 1-4 selects the page length. When it is OFF, the length is 11";

when it is ON, the length is 12".

C-2

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 58 59

Comments to this Manuals

No comments

Epson LX-90TM Installation Manual Page 48

Comments to this Manuals

Related products and manuals for Print & Scan Epson LX-90TM