Epson Stylus Color 400 Service Manual download pdf (Page 124)

Chapter 6 Maintenance

Rev. A

6-

3

Table 6-3. Lubrication Points (Continued)

No. Standard Remarks

5 <Lubrication Point>

The shaft for “GEAR, 16, 40.8” at

“FRAME, LEFT”

Use a syringe to apply it.

<Lubricant Type> G-26

<Lubrication Amount>

Approx. 5mm long

6 <Lubrication Point>

Bush for “ROLER, PF”

1) Left: Inside the bush

2) Right: Inside the bush (near the

pump assembly)

When applying to the right bush, apply it

from the side of the paper path and wipe

off any grease stick out to the cap

assembly side.

Rotate “ROLLER, PF” after applying the

grease to evenly distribute it in the bush.

Use a syringe to apply it.

<Lubricant Type> G-26

<Lubrication Amount>

Approx. 3mm diametrically

7 <Lubrication Point>

Both Left/Right Bush for “ROLLER, EXIT”

Do not put grease around the paper path.

Use a syringe to apply it.

<Lubricant Type> G-26

<Lubrication Amount>

Evenly apply inside the bush

8 <Lubrication Point>

Contact between “HOLDER, PULLEY,

DRIVEN” and “FRAME, UPPER”

Verify that the holder slides only with a

spring force after applying the grease.

Use a syringe to apply it.

<Lubricant Type> G-26

<Lubrication Amount>

2mm long at each specified point

9 <Lubrication Point>

ASF;

A round hole of the right frame of ASF (to

hold the roller shaft)

Do not put grease to “ROLLER,

ASSEMBLY, LD”.

<Lubricant Type> G-26

<Lubrication Amount>

Evenly apply inside the hole

10 <Lubrication Point>

ASF;

Contact between “HOPPER” and “LEVER,

HOPPER, RELEASE”

Completely wipe off any grease stack out

to inner side of ASF.

<Lubricant Type> G-26

<Lubrication Amount>

Evenly apply to the contact

1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 144 145

Comments to this Manuals

No comments