Epson Stylus Color 400 Service Manual Page 32
- Page / 145
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
EPSON Stylus Color 400 Service Manual
Rev. A
1-2
5
1.6 Printer Initialization
Stylus Color 400 has three kinds of initialization methods. Following explains each initialization.
[1.Power-on initialization]
This printer is initialized when turning the printer power on, or printer recognized the cold-reset
command (remote RS command).
When printer is initialized, following action is performed.
(a) Initializes printer mechanism.
(b) Clears input data buffer.
(c) Clears print buffer.
(d) Sets default values.
[2.Operator initialization]
This printer is initialized when turning the printer power on again within 10 seconds from last
power off, or printer recognize the /INIT signal (negative pulse) of parallel interface.
When printer is initialized, following action is performed.
(a) Cap the printer head.
(b) Eject a paper.
(c) Clears input data buffer.
(d) Clears print buffer.
(e) Sets default values.
[3. Software initialization]
The ESC@ command also initialize the printer.
When printer is initialized, following action is performed.
(a) Clears print buffer.
(b) Sets default values.
1.7 Initialization Settings
Stylus Color 400 initializes following settings when the initialization is performed. Also, if the user changes
the settings in the Panel setting, Default setting or Remote command setting, values or settings which
are possible to be stored are initialized as initialization settings.
Page position : Page heading location as present paper location
Line spacing : 1/6 inch
Right margin position : 80 lines
Left margin position : first line
Character pitch : 10CPI
Printing mode : Text mode (Not Raster graphics mode)
- SERVICE MANUAL 1
- Copyright 2
- Nagano, Japan 2
- PRECAUTIONS 3
- REVISION SHEET 5
- TABLE OF CONTENTS 6
- Chapter 1 7
- Product Descriptions 7
- 1.1 Features 8
- 1.2 Specifications 9
- 1.2.2 Paper Specification 11
- 1.2.4 Printing Area 13
- Printable area 14
- 1.2.5 Environmental Condition 15
- Chapter1 Product Description 17
- Note 3) 17
- 1.2.7 Physical Specification 18
- 1.2.8 Input Data Buffer 18
- 1.2.9 Electric Specification 19
- 1.2.10 Reliability 19
- 1.2.11 Safety Approvals 19
- 1.2.12 Acoustic Noise 20
- 1.2.13 CE Marking 20
- 1.3 Interface 22
- Tready Tbusy 24
- Tack Tnbusy 24
- Virtual Busy Status 25
- 1.4 Control Panel 26
- 1.4.2 Panel Functions 27
- 1.5 Error Status 30
- 1.5.4 No Ink-Cartridge 31
- 1.5.5 Maintenance Request 31
- 1.5.6 Fatal Errors 31
- 1.6 Printer Initialization 32
- 1.7 Initialization Settings 32
- 1.8 Main Components 33
- 1.8.4 C206PNL(Panel) Board 34
- Chapter 2 35
- Operating Principles 35
- 2.1 OVERVIEW 36
- 2.1.1.1 Printing Mechanism 37
- Nozzle Plate 38
- Ink Course 38
- 2.1.1.1.2 Printing Method 39
- Nozzle No.#9 40
- Nozzle No.#4 40
- Full-Overlap Micro-Weave: 41
- 2.1.1.2 Carriage Mechanism 42
- Parallelism 44
- Adjust Lever 44
- Eject Notched Roller 48
- Eject Roller 48
- PF Roller 48
- Support Roller 48
- 2.1.1.4 Ink System 49
- 2.1.1.4.1 Pump Mechanism 50
- CW Rotation 51
- CCW Rotation 51
- Tube pressured 51
- Tube released 51
- 2.1.1.4.2 Cap Mechanism 52
- +42 V DC 53
- Filter Circuit 55
- Prevention of 55
- Rectifier circuit 55
- Full Wave 55
- 2.2.2 C206 MAIN Board 56
- 2.2.2.1 Reset Circuits 58
- 2.2.2.2 Sensor Circuits 59
- 2.2.2.4 Timer Circuit 61
- 2.2.2.5 DRAM Control 61
- Gate Array 63
- E05B43(IC2) 63
- E05B44(IC2) 66
- LB1845(IC15) 66
- Chapter 3 67
- Disassembly and Assembly 67
- 3.1 OVERVIEW 68
- 3.1.2 Tools 69
- 3.2 Disassembly Procedures 71
- 3.2.1 Removing the Housing 72
- WORK POINT 73
- Fastener Head 77
- Print Head Unit 77
- Head Cleaner 80
- Order of assembling 80
- PF Roller Assembly 91
- HP Detector 93
- Chapter 4 94
- Adjustment 94
- 4.1 Overview 95
- 4.2 Adjustment 96
- Print Head Side 97
- Cleaner Head 97
- Overlap amount 97
- = More than 0.5mm 97
- Print Head 102
- 4.2.2.5 Bi-D Adjustment 103
- Chapter 5 105
- Troubleshooting 105
- 5.1 Troubleshooting 106
- Rev.A5-2 107
- Rev.A5-4 109
- 5.2.2 Error is detected 110
- Rev.A5-6 111
- Rev.A5-8 113
- Rev.A5-10 115
- Rev.A5-12 117
- Rev.A5-14 119
- Chapter 6 121
- Maintenance 121
- 6.1 OVERVIEW 122
- 6.1.3 Lubrication 123
- Chapter 6 Maintenance 124
- (Oil pad) 125
- Carriage Assembly 125
- (bottom view) 125
- "SHAFT, CR, GUIDE" 125
- "GEAR, 23.2" 127
- "GEAR, 16, 40.8" 127
- "GEAR, 67.2" 127
- "COMBINATION GEAR 127
- 8, 14.4" 127
- "HOPPER, ASSEMBLY" 128
- "FRAME, ASF" 128
- Appendix 129
- A.1 Connector Summary 130
- A.2 Connector Summary 131
- A.3 EEPROM Address Map 133
- A.5 Exploded Diagrams 141
- As of September, 1996 144
- SEIKO EPSON CORPORATION 145
Related products and manuals for Print & Scan Epson Stylus Color 400
Print & Scan Epson WorkForce 845 User's Guide
(322 pages)
(322 pages)
Print & Scan Epson TM-FX2180 User Manual
(4 pages)
(4 pages)
(510 pages)
Print & Scan Epson XP-850 User Manual
(191 pages)
(191 pages)
Print & Scan Epson LQ-510X User Manual
(279 pages)
(279 pages)
Print & Scan Epson RC170 Specifications
(44 pages)
(44 pages)
Print & Scan Epson XP-300 User's Guide
(32 pages)
(32 pages)
Print & Scan Epson 24-Pin User's Guide
(48 pages)
(48 pages)
Print & Scan Epson C11CB07201 User Manual
(16 pages)
(16 pages)
(217 pages)© 2020, manymanuals.com. All rights reserved. | 1.278 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals