Epson Stylus Color 800N Setup Guide download pdf (Page 11)

Setup Guide

Testing the Printer

If you want, you can run a test on your printer to see how it’s

working. Follow the steps in Chapter 6 of your printer User’s

Guide.

Turn off the printer to stop test printing.

Connecting the Printer to Your

Network

You can connect your Ethernet-ready printer to either an

Ethernet Thin Coaxial (10BASE2) or an Ethernet Twisted-Pair

(10BASE-T) network connection. You can only attach one

cable at a time. Follow these steps:

1. Attach the network cable to the appropriate connecter on

the card.

2. To initialize the card, plug the printer into an electrical

outlet while pressing the status sheet button. Hold down

the button for about three seconds.

3. To print a status sheet, turn on the printer and press the

status sheet button again. This sheet gives you important

information including the serial number and hardware

address of the card. Keep the status sheet so you can use it

when you configure the card.

twisted-pair

(10BASE-T)

thin coaxial

(10BASE2)

status

sheet

button

QuikSet2.fm Page 8 Wednesday, October 15, 1997 3:49 PM

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 31 32

No comments

Epson Stylus Color 800N Setup Guide Page 11