Epson Stylus Photo Ink Jet Printer Technical Information download pdf (Page 6)

1. Turn off the printer.

2. Hold down the load/eject button and press the

power button. Hold down the buttons until the power

light starts to flash. Then release the buttons.

A page prints out showing the ROM version and a nozzle

check pattern.

3. When it’s finished, turn off the printer. If you have any

problems with the test, see Chapter 6 in your User’s Guide

for more information.

You can connect your EPSON Stylus

™

Photo to either an IBM

compatible PC or an Apple

Macintosh

. You’ll need a shielded,

twisted-pair parallel cable to connect to a PC or an Apple

System Peripheral-8 cable to connect to a Macintosh. For a

complete list of system requirements, see the Introduction of

your printer User’s Guide.

1. Turn off the printer and your computer.

2. Connect the cable to the printer’s parallel interface; then

squeeze the wire clips together until they lock in place. (If

your cable has a ground wire, connect it now.)

3. Connect the other end of the cable to your computer’s

parallel port and secure it as necessary.

Check the Printer

Note:

The printer is assigned to

parallel port LPT1; if you

want to use a different

port, see your Windows

documentation for

instructions.

Connect the Printer to Your Computer

ground

wire

Connecting to a PC

Quick setup Comoro 5/22/97, 10:18 AM6

1 2 3 4 5 6 7 8

No comments

Epson Stylus Photo Ink Jet Printer Technical Information Page 6