Epson Stylus Pro 10000 - Archival Ink - Stylus Pro 10000 Print Engine Specifications download pdf (Page 7)

EPSON Stylus Pro 10000

5/01 EPSON Stylus Pro 10000 - 7

System Requirements

Macintosh

❏ For USB connection: Power Macintosh

G3, G4, or

iMac

™

series (System 8.5.1 through 9.1; System 9.1

recommended) with a compliant USB port and a shielded

USB “AB” cable from Series A (computer) to Series B

(printer) up to 6.6 ft (2 m) long

For IEEE 1394 connection: iMac DV, G3, or G4 series

(System 8.6 or later with FireWire Update 2.1 or later;

System 9.1 recommended) with a compliant IEEE 1394

port and a shielded IEEE 1394 cable

For 10/100 BaseT Ethernet connection: iMac, G3, or G4

series (System 8.5.1 through 9.1; System 9.1 recommended)

with a network cable

❏ 350 MHz or higher processor

❏ 256MB of RAM

❏ At least 50MB free hard disk space to install the software,

and at least 150MB free hard disk space for processing files

(2GB or more recommended)

❏ Quad-speed (4×) or faster CD-ROM or DVD drive for

installing the printer software

Note:

If you are not using Photo Printing Accelerator in your driver, or if you

are using a software or hardware RIP, you must have a Power

Macintosh G4 with a 500 MHz or higher processor and 512MB RAM

to keep the printing running at full engine speed.

Windows

❏ For parallel connection: IBM

-compatible PC running

Windows 95, 98, Me, NT 4.0, or 2000; a high-speed

bidirectional, IEEE-1284 compliant parallel cable, 6 to 10

ft (1.8 m) long, with a D-SUB, 25-pin, male connector for

the computer and a 36-pin, Centronics

compatible

connector for the printer

For USB connection: IBM-compatible PC running

Windows 98, Me, or 2000 with a Windows compliant USB

port and a shielded USB “AB” cable from Series A

(computer) to Series B (printer) up to 6.6 ft (2 m) long

For IEEE 1394 (FireWire) connection: IBM-compatible

PC running Windows Me or 2000, with a compliant IEEE

1394 port and a shielded IEEE 1394 cable

For 10/100 BaseT Ethernet connection: Ethernet equipped

PC running Windows 95, 98, Me, NT 4.0, or 2000, with a

network cable

❏ Pentium

II 400 MHz or higher processor

❏ 256MB or RAM

❏ At least 50MB of free hard disk space to install the software,

and at least 150MB of free hard disk space for processing

files (2GB or more recommended)

❏ Quad-speed (4×) CD-ROM or DVD drive for installing the

printer software

Note:

If you are not using Photo Printing Accelerator in your driver, or if you

are using a software or hardware RIP, you must have a Pentium III

700 MHz or higher processor with 512MB RAM to keep the printer

running at full engine speed.

Control Panel

Control Panel Buttons and Functions

Button Function

Power Turns the printer on and off.

Cleaning Runs print head cleaning when pressed for

3 seconds.

Pause (Reset 3 Sec.) Stops printing temporarily. Press a second

time to resume printing.

Clears print data from the printer memory if

pressed and held for three seconds.

Returns the printer to READY status when

pressed in SelecType mode.

SelecType Causes the printer to enter SelecType mode

when pressed in READY status.

In SelecType mode, this button can be used

to select a desired menu.

Paper Source (Item) Selects the paper source:

Roll Auto Cut

Roll

Cutter Off

, or

Sheet

. If you press this button

during the ink drying process, you will need to

press

Enter

to select your setting.

In SelecType mode, this button can be used

to select an item in a menu.

display

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Comments to this Manuals

No comments

Epson Stylus Pro 10000 - Archival Ink - Stylus Pro 10000 Print Engine Specifications Page 7

Comments to this Manuals

Related products and manuals for Print & Scan Epson Stylus Pro 10000 - Archival Ink - Stylus Pro 10000 Print Engine