Epson XP-610 User's Guide download pdf (Page 34)

Access point mode

If your product is not already connected to a wireless network, it enters access point mode and the

product itself acts as the network access point for up to 4 devices. When operating in this mode, your

product displays an AP connection symbol on the LCD screen.

Peer-to-peer mode

If your product is already connected to a wireless network, it enters peer-to-peer mode and

disconnects from any other networks. This also disables any other product features requiring access

to the Internet. When operating in this mode, your product displays a Direct or D connection symbol

on the LCD screen.

Note: To disconnect a peer-to-peer mode connection, release the connection to your product from

your computer or other device. Your product will reconnect to the previously used network.

Enabling Wi-Fi Direct Mode

Parent topic: Wi-Fi Networking

Enabling Wi-Fi Direct Mode

You can enable Wi-Fi Direct mode to allow direct communication between your product and computer or

other devices without a wireless router or access point.

1. Press the home button, if necessary.

2. Press the arrow buttons to select Wi-Fi Setup and press the OK button.

You see this screen:

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 286 287

No comments

Epson XP-610 User's Guide Page 34