Epson Stylus CX7800 User Manual download pdf (Page 15)

Epson Stylus CX7800

8/05 Epson Stylus CX7800 - 15

If you don’t see any improvement after cleaning four or five

times, see your Basics Guide for problem solving. You can

also turn the printer off and wait overnight. This lets any

dried ink soften. Then try cleaning the print head again.

Tip:

If you do not use your Epson Stylus CX7800 often, it is a good

idea to print a few pages at least once a month to maintain good

print quality.

Replacing Ink Cartridges

The LCD screen indicates when an ink cartridge is low or

needs to be replaced:

❏ When an ink cartridge is low, you see the H ink

low icon in

the upper-left corner of the LCD screen.

❏ When printing or copying, a colored bar showing which ink

cartridge is low appears next to the H ink low icon.

❏ When an ink cartridge is empty, the LCD screen displays

the ink levels and indicates the empty cartridge. (You

cannot print when a cartridge is empty.)

When a cartridge is more than six months old, you may need

to replace it if printouts don’t look their best. If the quality

doesn’t improve after cleaning and aligning the print head,

you can replace the cartridge even if the

H ink low icon is not

displayed on the LCD screen.

You can purchase genuine Epson ink and paper from an

authorized Epson reseller. To find the nearest reseller, please

call 800-GO-EPSON (800-463-7766). To purchase online,

visit www.epsonstore.com (U.S. sales only). In Canada, please

call (800) 463-7766 for reseller referral.

Caution:

Leave the empty cartridge installed until you have obtained a

replacement, or the ink remaining in the print head nozzles may dry

out.

We recommend that you use genuine Epson cartridges. The use of

other products may affect your print quality and could result in printer

damage. Yields vary considerably based on images printed, print

settings, paper type, frequency of use, and temperature. The printer

ships with full cartridges and part of the ink from the first cartridges is

used for priming the printer.

1. Make sure the Epson Stylus CX7800 is turned on.

2. If an ink cartridge is empty, the LCD screen displays the ink

levels and indicates the empty cartridge. Press the x

Start

button.

If an ink cartridge is low, the

H ink low icon appears on the

LCD screen. Press the

Setup/Utilities button. Press the

l or r

Photo/Options button to select Change

Cartridges

, then press the x Start button. At the

confirmation screen, press the x

Start button again.

3. Open the cartridge cover.

Caution:

Never attempt to open the cartridge cover while the print head is

moving. Wait until the cartridges have moved to the replacement

position.

4. Squeeze the tab at the back of the cartridge and lift it

straight out. Dispose of it carefully. Do not take the used

cartridge apart or try to refill it.

Warning:

If ink gets on your hands, wash them thoroughly with soap and

water. If ink gets into your eyes, flush them immediately with

water.

Ink low

Low ink

cartridge

1 2 ... 10 11 12 13 14 15 16 17 18

Comments to this Manuals

No comments

Epson Stylus CX7800 User Manual Page 15

Comments to this Manuals

Related products and manuals for Printers Epson Stylus CX7800