Epson Stylus CX7800 User Manual download pdf (Page 16)

Epson Stylus CX7800

16 - Epson Stylus CX7800 8/05

5. Before you open the new ink cartridge package, shake it

four or five times. Then remove it from the package.

Caution:

Do not remove or tear the label on the cartridge; otherwise, ink

will leak.

Do not touch the green chip on the front of the cartridge. This can

damage the ink cartridge.

6. Place the new ink cartridge into the cartridge holder and

push it down until it clicks into place.

7. Replace any other cartridges that need to be replaced.

8. Close the ink cartridge cover and press it until it clicks into

place.

9. Close the scanner.

10. Press the x

Start button. The Epson Stylus CX7800 begins

charging ink and the P

On light starts flashing. This takes

about one minute. When it’s finished, the P

On light stops

flashing and remains on.

Caution:

Never turn off the Epson Stylus CX7800 while the P On light is

flashing or you’ll waste ink.

11. Press the Setup/Utilities button to return to the previous

mode.

Aligning the Print Head

If your printouts look grainy or blurry, or you see light or dark

horizontal banding, you may need to align the print head.

Note:

Banding may also occur if your cartridges are low on ink or you need

to clean the print head.

1. Turn on the Epson Stylus CX7800.

2. Load several sheets of paper.

3. Windows: Right-click the printer icon on your taskbar

(in the lower right corner of your screen). Select

Print Head

Alignment

Macintosh OS X: Open the

Applications folder and select

EPSON Printer Utility. Select your Epson Stylus CX7800

in the printer list, click

OK, and select Print Head

Alignment

1 2 ... 11 12 13 14 15 16 17 18

Comments to this Manuals

No comments

Epson Stylus CX7800 User Manual Page 16

Comments to this Manuals

Related products and manuals for Printers Epson Stylus CX7800