Epson Stylus NX100 User Manual download pdf (Page 20)

20 Maintaining Your NX100 Series

Maintaining Your NX100

Series

Follow the instructions in this chapter for checking and cleaning the print head

nozzles and replacing ink cartridges. To align the print head, if necessary, see your

on-screen Epson Information Center.

Caution:

To keep your NX100 Series looking like new, don’t place anything on top of the cover or

use it as a writing surface. If you need to clean the cover, use only a soft, non-abrasive

microfiber-type cloth.

Checking the Print Head Nozzles

If your printouts are faint or have gaps in them, some of the nozzles in the print

head may be clogged or ink may be running low in one or more of the ink

cartridges. Follow the steps below to check the print head nozzles.

1. Load letter-size paper in the sheet feeder.

2. Turn off the NX100 Series.

3. Hold down the y

Stop button as you press the P On button to turn the

NX100 Series back on. Hold down both buttons until the P

On light begins

to flash, then release the buttons.

nx_tx_100_qg.book Page 20 Wednesday, May 21, 2008 3:20 PM

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 39 40

No comments

Epson Stylus NX100 User Manual Page 20