Epson 10+ User Manual download pdf (Page 9)

EPSON PowerLite Home 10 Projector

7/03 EPSON PowerLite Home 10 Projector - 9

Changing Menu Settings

You can use the buttons on the projector or remote control to

display the menus and change settings.

1. Press the

Menu button on the projector or remote control.

You see a screen similar to the one below (the screen you see

depends on the equipment you’ve connected):

The four menus are shown on the left, and the options

available to the highlighted menu are shown on the right.

Note: If nothing is connected to the projector, some options

may not be available.

2. Press the up or down arrow button on the remote control or

the or button on the projector’s control panel to

move to the menu you want. When your menu is

highlighted, press the

Select button. You see the options for

the selected menu on the right. The highlight moves to the

first option on the list.

3. Press the up or down arrow button on the remote control or

the or button on the projector’s control panel to

move through the list of options. When the option you want

to change is highlighted, press the

Select button.

You may see a list of settings, a submenu providing

additional options, or a line menu or slider bar similar to the

one below:

4. If you see a list of settings, use the arrow buttons on the

remote control or the or button on the projector’s

control panel to move to the setting you want, then press the

Select button. Enabled settings are indicated by a green

light, while disabled ones are gray.

If an option has a submenu, press the

Select button to

display it, then select the setting you want.

If you see a line menu or slider bar, press the left or right

arrow button on the remote control, or the or button

on the projector to change the setting.

5. Press the

Esc button to return to the previous menu.

6. Press the

Menu button to exit the menu system.

Replacing the Remote Control Battery

When the battery in the remote control runs out, follow the

steps below to replace it. You’ll need a CR2025 lithium battery,

which you can obtain commercially.

1. Press the catch in as you pull the battery holder out

2. Remove the old battery and insert the new one. Make sure

the

+ side of the battery is facing up, as shown.

3. Slide the battery holder back

into the remote control until it

clicks into place.

Caution:

When replacing the battery, follow these guidelines:

❑ Replace the battery as soon as it runs out.

❑ If the battery leaks, wipe away battery fluid with a soft cloth. If

fluid gets on your hands, wash them immediately.

❑ Remove the battery if you will not be using the remote for a

long period of time.

❑ Dispose of the used battery in accordance with local

regulations.

Press here and slide

out battery holder

New battery

Old battery

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Epson 10+ User Manual Page 9

Comments to this Manuals

Related products and manuals for Projectors Epson 10+