Epson 737C User Manual download pdf (Page 20)

Epson PowerLite 737c Projector

20 - Epson PowerLite 737c Projector 2/05

Controlling Your Projectors

The control buttons in the upper-right of the EMP Monitor

screen let you turn the projectors on and off and select video

signals. (Hold the mouse pointer over a button to see a

description of its meaning.) Select the projector you want to

operate (with the mouse pointer) before clicking one of the

buttons.

If you need the most current status information about your

projectors, click the

Refresh button.

Note:

To turn on a projector when it’s in standby mode (plugged in but

not projecting), first select

Network ON as the Standby Mode

setting in the projector’s Extended menu.

Configuring the Monitoring Interval

You can select how often EMP Monitor checks the

projector status:

1. From the Tool menu, select

Configuration. You see this

screen.

Note:

If you want EMP Monitor to run whenever you start your

computer, click

Add to Startup.

2. Select the desired update interval and click

OK.

Understanding the Notification Messages

If a projector experiences a problem, it can send an e-mail

message to each of the addresses you provided using EMP

NetworkManager. The message includes the heading “Epson

Projector” in the subject line. The body of the message

contains the name of the projector, the projector’s IP address,

and a description of the problem. The problem descriptions

are similar to the errors reported by EMP Monitor listed on

page 19.

If a plus (+) sign appears before the description, it indicates

that a problem has occurred. A minus (–) sign appears when

the problem is resolved.

Note:

If a projector develops a critical problem, it may not be possible for

it to report the error.

Projector Status Lights

The lights on top of the projector indicate the projector’s status

and let you know when a problem occurs.

Control buttons

Power

light

Lamp

light

Temperature

light Description

Flashing

green

Off Off The projector is warming up.

Wait for the image to appear.

Green Off Off The projector is operating

normally.

Flashing

orange

Off Off The projector is cooling

down. Wait for the light to

stop flashing and remain

orange before unplugging it.

Red Flashing

red

Flashing red There is an internal error in

the projector. Turn off the

projector and unplug it.

Contact Epson for help.

Red Off Flashing red There is a problem with the

fan or a sensor. Turn off the

projector and unplug it.

Contact Epson for help.

Power light

Lamp light

Temperature

light

1 2 ... 15 16 17 18 19 20 21 22 23

Comments to this Manuals

No comments

Epson 737C User Manual Page 20

Comments to this Manuals

Related products and manuals for Projectors Epson 737C