Epson 9000i - PowerLite SXGA LCD Projector Owner's Manual download pdf (Page 106)

■

■ ■ ■ ■

Replacing the Lamp

Replace the lamp when:

• The projected image gets darker or starts to deteriorate.

• The projection lamp indicator is flashing orange.

• The message "LAMP REPLACE" appears on the screen

when the projector lamp comes on.

♦

Note:

To keep the initial brightness and image quality, replace

the lamp as soon as possible when the message appears on the

screen. The replacement message is set to being displayed at about

1500 hours of use. Contact your local EPSON dealer for a spare

lamp. Request part number ELPLP09.

♦

Warning:

Let the lamp cool before replacing it. Also, do not

touch the glass portion of the lamp assembly. Touching the glass

portion of the lamp will result in premature lamp failure.

1. Turn off the projector and unplug the power cable.

2. Turn the projector over so you can access the lamp cover.

3. Use a screwdriver, coin, or similar object to loosen the

two retaining screws on the lamp cover. When the screws

are loose, lift off the lamp cover. (You cannot remove

these screws from the cover.)

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 127 128

No comments

Epson 9000i - PowerLite SXGA LCD Projector Owner's Manual Page 106