Epson EB-X11H User's Guide download pdf (Page 81)

This section explains how to replace the lamp and the air filter.

Replacing the Lamp

Lamp replacement period

It is time to replace the lamp when:

• The following message is displayed.

"Time to replace the lamp. Please contact your Epson projector reseller or

visit www.epson.com to purchase."

The message is displayed for 30 seconds.

• The lamp indicator flashes orange.

• The projected image gets darker or starts to deteriorate.

Attention

• The lamp replacement message is set to appear after the following time

periods in order to maintain the initial brightness and quality of the projected

images.

When Power Consumption is set to Normal: About 3900 hours

When Power Consumption is set to ECO: About 4900 hours

s Settings - Power Consumption p.60

• If you continue to use the lamp after the replacement period has passed, the

possibility that the lamp may explode increases. When the lamp replacement

message appears, replace the lamp with a new one as soon as possible, even if

it is still working.

• Do not repeatedly turn off the power and immediately back on. Turning the

power on and off frequently may shorten the lamp's operating life.

• Depending on the characteristics of the lamp and the way it has been used,

the lamp may become darker or stop working before the lamp warning

message appears. You should always have a spare lamp unit ready in case it is

needed.

How to replace the lamp

The lamp can be replaced even when the projector is suspended from a

ceiling.

Replacing Consumables

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 102 103

No comments

Epson EB-X11H User's Guide Page 81