Epson EH-TW4000 User's Guide download pdf (Page 40)

Configuration Menu Functions

"Memory" menu

"Reset" menu

This retrieves settings previously saved using "Save Memory". p.24

This cannot be selected when nothing is saved at "Save Memory".

This can be used to save "Image" menu settings. p.24

This is used to erase unwanted saved memory. p.25

This can be used to change the names of the memories from "Memory1" to "Memory10". You can

rename so that its settings are easy to recognize. Either of the following two methods can be used to

change a memory name. p.25

• Select a new memory from the list and then rename it.

• Select "Customized" and then enter a desired name.

This resets all configuration menu settings to their default settings. "Component" and "Language" in the

"Settings" menu, and the settings of "Memory" menu are not returned to their default even if "Reset All"

is executed.

This resets (erases) all settings that have been made using the "Save Memory".

Clear the cumulative lamp operating time and reset to "0H". Perform this procedure when you replace

the lamp.

Load Memory

Save Memory

Erase Memory

Rename Memory (EH-TW4000 only)

Reset All

Reset Memory

Reset Lamp Hours

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 63 64

No comments

Epson EH-TW4000 User's Guide Page 40