Epson Elp-3500 Service Manual Page 62

  • Download
  • Add to my manuals
  • Print
  • Page
    / 114
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 61
EPSON ELP-3500 Service Manual
3-11
3.2.5 Removing the Exhaust Fan Unit
Prerequisite: Complete the steps explained in Section 3.2.1.
Exhaust Fan
Fan Holding
Plate
Screw
Figure 3-12.
Screws
Figure 3-13.
1. Disconnect the cable connected to CN503.
2. Remove 4 screws from the fan holding plate to detach the fan and holding plate.
Screws: +M3x8 F/Zn: P Tight P/N 1021824
Mounting torque: 6.0 kg cm = 5.2 lb inch
Screws: +M3x6 F/Ni: P/N 1033122. Mounting torque: 6.0 kg cm = 5.2 lb inch
3. Remove 2 screws mounting the exhaust fan and separate the fan and holding plate.
Screws: +M4x10 F/Zn Bind: P/N 1022793
Mounting torque: 6.0 kg cm = 5.2 lb inch
Caution:
1. When installing the exhaust fan, use care with its orientation. Installing the fan in the
reverse orientation may result in a device failure or extended cooling time because of
overheating. Make sure the label on the fan faces out.
2. The exhaust fan unit and its peripherals are susceptible to dust and dirt. When
installing the exhaust fan unit, check it for dirt and clean it if necessary.
Page view 61
1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 113 114

Comments to this Manuals

No comments