Epson PowerLite 7800pNL Quick Start Guide download pdf

Connect the power cord to your

projector and plug the other end

into an electrical outlet.

Remove the lens cover.

Locate the projector’s remote control

and turn it over. Push down on the

ridges at one end of the battery cover

as you slide the cover off.

Locate the batteries that came with

your projector and insert them as

shown. Then replace the battery cover.

Push up on the remote control’s on/off

switch to turn it on.

Aim the remote control at the projector

and press the Power button. The

projector’s power light flashes green,

and then stays on.

Turn on or restart your laptop. (Windows

only:

If you see a New Hardware screen, click Cancel.)

Turn over

Turn on your equipment

Connect the projector

to your laptop

Power cord VGA computer cable

Follow these instructions to connect the projector

to your laptop. To connect other devices, such as

a VCR or desktop PC, see your User’s Guide.

EPSON

PowerLite

7800p

Quick Setup

CAUTION: Before unplugging the projector...

To shut the projector down properly:

1. Press the Power button twice. Let the projector cool while

the power light flashes orange (about 30 seconds).

2. Once the light stops flashing and stays on, it’s safe to unplug

the projector.

Never unplug the projector when the power light is green or

flashing orange.

For most setups, you’ll need just these two cables:

Make sure your projector and laptop are turned off.

Connect one end of the VGA computer cable to the

Computer port on the projector.

Connect the other end to your laptop’s video-out or monitor

port. If you can’t connect the cable to your PowerBook,

you may

need to use an adapter. See your User’s Guide for instructions.

Lens cover

Ridges

On/off

switch

1 2

Summary of Contents

Page 1 - Connect the projector

1Connect the power cord to your projector and plug the other end into an electrical outlet.2Remove the lens cover.3Locate the projector’s remote contr

Page 2 - Troubleshooting

1Rotate the focus ring to sharpen the image.2Rotate the zoom ring to reduce or enlarge the image. Turn to W (wide) to enlarge or T (tele) to reduce. (