Epson GT-9600 User Manual download pdf (Page 62)

4-2

Maintenance and Troubleshooting

CRESSON

Rev. C

A5 size CHAP4.fm

2/16/99 Pass 0

Proof Sign-off:

<tantoname> _______

<leadername> _______

<editorname> _______

Maintenance

Cleaning the scanner

To keep your scanner operating at its best, you should clean it

periodically, as described below.

1. Unplug the power cord.

2. Clean the outer case with mild detergent and water.

3. If the document table glass becomes dirty, clean it with a soft

dry cloth. If the glass is stained with grease or some other

hard-to-remove material, use a small amount of glass cleaner

and a soft cloth to remove it. Wipe off all remaining liquid.

Be sure that there is no dust on the document table glass. Dust can

cause white spots in your scanned image.

Caution:

❏ Be careful not to scratch or damage the document table glass,

and do not use a hard or abrasive brush to clean it. A damaged

glass surface can decrease scanning quality.

❏ Never use alcohol, thinner, or corrosive solvent to clean the

scanner. These chemicals can damage the scanner

components as well as the case.

❏ Be careful not to spill liquid into the scanner mechanism or

electronic components. This could permanently damage the

mechanism and circuitry.

❏ Do not spray lubricants inside the scanner.

❏ Never open the scanner case.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 105 106

No comments

Epson GT-9600 User Manual Page 62