Epson C82363 Specifications download pdf (Page 21)

Getting Started 1-5

2 Connect the network cable

Once the Ethernet card is installed in your printer, attach the network

cable. The card automatically detects which kind of cable is attached.

10Base2 connector (C82362* only)

Connect an Ethernet thin coaxial (10Base2) cable to the card using the

supplied Y-connector.

10BaseT connector (C82362* only)

Connect the Ethernet twisted-pair (10BaseT) cable to the card using

an RJ-45 connector.

Caution:

Attach only one network cable at a time.

10BaseT/100BaseTX (C82363*/C82364*)

Connect a category 5, twisted-pair Ethernet cable to the card with an

RJ-45 connector. Category 5 cable should be used for both 10BaseT

and 100BaseTX.

DC-IN connector (C82364* only)

Connect the AC adapter to the card.

3 Make printer settings using the printer’s control panel

Some EPSON printers require you to use the printer’s control panel

to select the interface you plan to use. See your printer manual for

instructions on making the necessary interface settings.

Note:

If your printer automatically selects the interface and has been set to Auto

mode, it is not necessary to make the interface settings.

4 Print a status sheet

Press and hold down the status sheet button for about three seconds

to print a status sheet. (Save the status sheet for reference.)

If a status sheet prints, the Ethernet card has been installed correctly.

Chap1.fm Page 5 Tuesday, August 25, 1998 9:34 AM

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 198 199

No comments

Epson C82363 Specifications Page 21