Epson EMP-51 User Manual download pdf (Page 63)

The Remote Control Does Not Operate

• Is the remote control R/C switch set to On? See page 25

• Are you pointing the remote control in the correct

direction for operation? See page 11

The range of operation is approximately 30° left or right and

approximately 15° above or below the remote control sensor

on the projector.

• Is the remote control too far from the projector?

See page 11

The operable distance is approximately 393.70inches (10m).

• Is the remote control receiver on the projector blocked?

• Is the remote control receiver in the path of direct

sunlight or strong fluorescent light?

• Are batteries in place? See page 12

• Are the batteries worn? See page 12

• Are the batteries inserted correctly? See page 12

Cannot Switch off (After Pressing the Power Button)

• The operation display indicator remains a steady

orange.

The operation display indicator of the projector is designed

to remain lit even after power is switched off.

When the plug is pulled out of the outlet, the operation

display indicator will go out.

• The fan does not stop.

After the Power button is pressed and power is turned off,

cool-down

* begins.

After cool-down, the operation display indicator lights

orange, and you should pull the plug out of the outlet.

* Cool-down time takes about 2 minutes.

OFF

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 81 82

No comments

Epson EMP-51 User Manual Page 63