Epson EMP-703 User Manual download pdf (Page 20)

■ ■ ■ ■

Setting Up the Projector

1. Place the projector on a sturdy, level surface within five

feet of the computer or video source.

♦

Caution:

Do not hold the projector by the lens. This can damage

the lens.

2. Place the projector at a correct distance from the screen.

The distance between the projector and the screen

determines the actual image size. Use the general

guidelines below to determine the correct distance.

3. Turn the projector so that the lens is at right angles to the

screen. If the projector is not angled correctly, the screen

image will be crooked.

4. Connect one end of the power cable to the projector’s

power connector. Connect the other end to an earthed

electrical socket.

The projector should be in sleep mode, indicated by an

orange power indicator.

♦

Warning:

Never look into the lens when the projector is on.

There is a risk that the projector might come on suddenly even

though it is not in use. The light from the lamp can damage your

eyes. It is especially important that children should not be

allowed to look into the lens.

Screen size Horizontal distance from projector to screen

300 inches (610x460cm) 450.7 inches (11.5m) ~ 546.3 inches (13.8m)

200 inches (410x300cm) 299.5 inches (7.7m) ~ 363.3 inches (9.2m)

150 inches (305x228cm) 223.9 inches (5.7m) ~ 271.7 inches (6.9m)

100 inches (200x150cm) 148.3 inches (3.8m) ~ 180.2 inches (4.5m)

80 inches (160x120cm) 118.1 inches (3.0m) ~ 143.6 inches (3.6m)

60 inches (120x90cm) 87.8 inches (2.3m) ~ 107.0 inches (2.7m)

40 inches (81x61cm) 57.6 inches (1.5m) ~ 70.4 inches (1.7m)

30 inches (61x46cm) 42.5 inches (1.1m) ~ 52.1 inches (1.3m)

26 inches (53x40cm) — ~ 44.7 inches (1.1m)

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 106 107

No comments

Epson EMP-703 User Manual Page 20