Epson EMP-703 User Manual download pdf (Page 41)

Connecting to an External Speaker or PA System

■ ■ ■ ■ ■

■

Connecting to an External Speaker or

PA System

Although the projector’s internal speakers are enough for

most small- or medium-size rooms, you can connect the

projector to an external speaker or public address (PA) system

for large rooms or to gain maximum benefit.

To connect the projector to an external sound system, you

need to obtain an RCA-to-3.5 mm stereo audio cable. You

can get one from your computer dealer.

1. Turn off the projector and speaker or PA system if they are

on.

2. Connect the cable’s 3.5 mm stereo miniplug to the

projector’s Audio Out jack.

3. Connect the RCA plugs to the external amplified speaker

or PA system. Insert the cable’s red plug into the Audio R

jack, and the white plug into the Audio L jack.

♦

Note:

The internal speakers are disabled when an external

audio system is used.

Audio Out jack

stereo audio cable

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 106 107

No comments

Epson EMP-703 User Manual Page 41