Epson EMP-730 User Manual download pdf (Page 26)

Projecting S-Video Images

Use a S-Video cable (commercially-available) to connect the video source to

the S-Video port at the rear of the projector.

Tip :

If more than one external component is connected to the projector, use the [Source]

button on the projector's control panel or the [S-Video/Video] button on the remote

control to select the S-Video port as the input source. (p.30)

Projecting Component Video Images

Use the optional component video cable to connect the video source to the

Computer/Component Video port at the rear of the projector. See "Appendices:

Optional Accessories" (p.82)

Tip :

• Change the "Input Signal" setting in the "Video" menu to "YCbCr " or "YPbPr "

after making the connections. (p.49)

• If more than one external component is connected to the projector, use the [Source]

button on the projector's control panel or the [Computer] button on the remote control

to set the input source to "YCbCr " or "YPbPr ", depending on the type of signal being

input. (p.30)

S-Video cable

(commercially-available)

To S-Video port

To video output port

Component video cable

(optional)

To video output port

To Computer/

Component Video port

Connecting to a Video Source

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 99 100

No comments

Epson EMP-730 User Manual Page 26