Epson AcuLaser M2010D User's Guide Page 105

  • Download
  • Add to my manuals
  • Print
  • Page
    / 169
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 104
Troubleshooting 105
Toner Cartridge Memory Error
Explanation:
A memory read/write error has occurred.
Reset the toner cartridge or replace it to a new one. See “Precautions for Replacing the Toner
Cartridge” on page 64 for instructions. If this does not resolve the problem, turn the power off and
then on again.
Replace Toner
Explanation:
The indicated toner cartridges have reached the end of its service life and need to be replaced.
When the Error light turns on, you cannot continue printing. Replace the toner cartridge with a
new one. See “Precautions for Replacing the Toner Cartridge” on page 64 for instructions.
Check Paper Size
Explanation:
The paper loaded in the specified paper source does not match the required paper size.
Replace the loaded paper with the correct size paper and press the Start/Stop button to resume
printing, or press the + Cancel Job button to cancel the print job.
Manual Feed
Explanation:
Indicates that the Manual Feed setting is selected in the printer driver.
Make sure that the desired paper is displayed in the printer driver and loaded in the manual feed
slot on the MP tray. You have to press the Start/Stop button once when you want to print in
manual feed mode.
If you want to print from the MP tray or the optional 250-sheet Paper Cassette Unit after printing in
the manual mode, be sure to clear the Manual Feed setting in the printer driver settings.
Note:
Before printing in the manual feed mode, take out the paper from other paper sources.
Duplex Printing Error
Explanation:
The printer has encountered problems during duplex printing. They may be caused by incorrect
settings for the paper source you are using.
Make sure you are using an appropriate type and size of paper for the duplex printing.
Paper Cassette Not Installed
Explanation:
The paper cassette is not installed, or not installed properly.
Install the paper cassette correctly.
Paper Out
Explanation:
There is no paper in the specified paper source.
Load paper of the size into the paper source.
Downloaded from ManualsPrinter.com Manuals
Page view 104
1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 168 169

Comments to this Manuals

No comments