Epson ActionPrinter 3260 s User's Guide download pdf (Page 53)

If you want to change the position where printing begins

on the page, press

LF/FF

to advance the page to the next

top-of-form position, and then follow the steps on page 2-5 to

adjust the loading position.

To eject the paper, tear off the paper entering the printer; then

press the

LF/FF

button to feed the paper forward.

Printing on Special Paper

In addition to printing on single sheets and continuous forms,

your printer can also print on a wide variety of paper types,

including multi-part forms, labels, and envelopes.

Before printing on special paper, you need to change the

paper-thickness setting.

Caution:

When printing on multi-part forms, thicker-than-normal paper,

labels, or envelopes, make sure your software program settings

keep the printing entirely within the printable area. Printing

past the edge of these papers can damage the print head.

For multi-part forms and labels, you should not print any

closer than 13 mm (0.5 inch) from either edge of the paper.

For information on the printable area of envelopes, see the

Appendix.

Adjusting the paper-thickness lever

The paper-thickness lever lets you specify the correct setting

for your printing material. It is factory-set for standard office

paper. Here’s how to change the setting for special papers:

Check on

reserved

Blackberry REV.D

A5 size Chapter 2

96/04/08 pass 1

Using the Printer

2-17

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 119 120

No comments

Epson ActionPrinter 3260 s User's Guide Page 53