Epson CX6400 Quick Start Guide download pdf

1 Insert the paper support into the slots behind the printer, as shown.

2 Lower the feeder guard into the slots behind the scanner lid.

(Insert the hinges on the feeder guard into the corresponding

slots on the printer.)

EPSON Stylus

CX6400

Start Here

1 Wait until you see “Initial Charge” displayed on the control panel.

2 Lift up the scanner section.

3 Shake the package of ink cartridges four or five times.

Then remove the cartridges from the package.

Caution: You must install all cartridges and leave them installed

for all types of printing. To avoid damaging the Stylus CX, never

move the print head by hand.

4 Open the cartridge cover.

5 Place each cartridge in its holder.

6 Press down on each cartridge until it clicks into place.

Install Ink Cartridges

1 Extend the output tray.

2 Slide the edge guide to the left.

3 Place a stack of paper against the right side of the feeder,

but don’t push it in. Slide the edge guide against the paper.

7 Close the ink cartridge cover, then close the scanner section.

The Stylus CX begins charging the ink delivery system.

Charging takes about 2 minutes. The green light flashes and the

Stylus CX makes various sounds. Don’t turn it off while the green

light is flashing or you’ll waste ink.

1 Make sure you have all the parts shown here. If any parts are missing,

contact EPSON

as described on the back of this sheet.

2 Remove all blue packing tape from the printer.

3 Lift up the scanner section. If it doesn’t open, make sure you have

removed all the tape.

4 Peel off the tape from the ink cartridge holder.

5 Close the scanner section.

Unpack

Turn over

Load Paper

Attach the Parts

1 Plug the Stylus CX into a grounded electrical outlet.

Caution: Do not connect the USB cable until instructed.

2 Press and hold the On button until the green lights come on.

Plug In and Turn On

Paper support

Software

CD-ROM

Quick Reference

EPSON Stylus CX6400

Ink cartridges Feeder guard

Don’t touch the green part

CPD-16930R1 4049040-00 XXX

On button

continue

1 2 3 4 5 6 7 8

Summary of Contents

Page 1 - Start Here

1 Insert the paper support into the slots behind the printer, as shown.2 Lower the feeder guard into the slots behind the scanner lid.(Insert the hing

Page 2

1 Insert the paper support into the slots behind the printer, as shown.2 Lower the feeder guard into the slots behind the scanner lid.(Insert the hing

Page 3

1 Insert the paper support into the slots behind the printer, as shown.2 Lower the feeder guard into the slots behind the scanner lid.(Insert the hing

Page 4

1 Insert the paper support into the slots behind the printer, as shown.2 Lower the feeder guard into the slots behind the scanner lid.(Insert the hing

Page 5 - Need Paper and Ink?

continuecontinueHere’s where to look for answers:EPSON Stylus CX6400 Quick Reference bookletOn-screen Reference GuideDouble-click the CX6400 Reference

Page 6

continuecontinueHere’s where to look for answers:EPSON Stylus CX6400 Quick Reference bookletOn-screen Reference GuideDouble-click the CX6400 Reference

Page 7

continuecontinueHere’s where to look for answers:EPSON Stylus CX6400 Quick Reference bookletOn-screen Reference GuideDouble-click the CX6400 Reference

Page 8

continuecontinueHere’s where to look for answers:EPSON Stylus CX6400 Quick Reference bookletOn-screen Reference GuideDouble-click the CX6400 Reference