Epson Photo R3000 Series User's Guide Page 27

  • Download
  • Add to my manuals
  • Print
  • Page
    / 119
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 26
F
Attach the roll paper holder to the rear of the
printer.
G
Feed the roll paper into the roll paper feeder on
the rear of the printer until it stops.
After you have held the paper in place for about
three seconds, it will be loaded the printer
automatically.
Tip:
Open the printer cover and look down into the
printer to check that the paper is not being fed at a
slant.
Cutting Roll Paper
Use scissors or other cutters to cut the print results from
the roll when printing is complete.
A
Choose whether to cut the paper after printing in
the control panel.
The following options are displayed.
Yes: Print a cut line and feed the paper.
No: Return to the standby screen. Select this
option to continue printing on current roll.
B
If you selected Yes, cut the paper along the cut
line.
Further instructions are displayed in the control
panel’s screen.
Tip:
To remove roll paper, confirm that Ready is
displayed in the control panel and press the +
button for two seconds. The paper will be fed back
through the printer. Turn the knob on the roll paper
holder to take up the excess paper.
Epson Stylus Photo R3000 User's Guide
Basic Operations
27
Page view 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 118 119

Comments to this Manuals

No comments