Epson Photo R3000 Series User's Guide download pdf (Page 35)

Check other settings, and then start printing.

Turning Off the Power

Using Power Off Timer

This printer comes equipped with the following two

types of power saving settings. You can save power by

transitioning into sleep mode or use the Power Off

Timer function to automatically turn off the power

when the printer has not been used for a certain period

of time.

❏ Sleep mode

When the printer enters sleep mode, the control

panel's screen turns off and the internal motors and

other parts switch off to consume less power.

Sleep mode ends and normal operation is restored

when a print job is received or any button

(excluding the P button) is pressed in the control

panel. The printer will enter sleep mode if no

operations are performed for 13 minutes.

Tip:

❏ The printer enters sleep mode when there are

no errors, no print jobs being received, and no

control panel or other operations performed.

❏ When the printer enters sleep mode, the

control panel’s screen goes blank as if the

power has been turned off, but the P light

remains lit.

❏ Power Off Timer

The printer includes a Power Off Timer function

that allows the printer to be turned off

automatically if there are no errors, no print jobs

being received, and no control panel or other

operations being performed for more than the

specified amount of time. In the Power Off Timer

setting, you can choose the elapsed time before the

printer is automatically turned off from 4 Hours

and 8 Hours.

At the factory setting, the Power Off Timer setting

is set to 4 Hours.

Power Off Timer settings can be selected in the

Setup menu. U “The Setup Menu” on page

Epson Stylus Photo R3000 User's Guide

Basic Operations

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 118 119

No comments

Epson Photo R3000 Series User's Guide Page 35