Epson PLQ-20M User's Guide download pdf (Page 33)

22 Paper Handling

Note:

The top-of-form position can be set from 1.0 mm to 33.8 mm in the

PR2 mode and from 1.0 mm to 33.9 mm in the ESC/P and IBM

PPDS modes.

6. Insert a sheet of A4 paper into the front slot. The printer prints

triple H in capitals (HHH) on the current top-of-form position

and ejects the sheet. You may continue to adjust the position

by pressing the F1/Eject and F2 buttons and checking the

position by inserting another sheet.

7. After finishing the adjustment, turn off the printer. The setting

does not change even if the printer is turned off.

Adjusting the printing start position

The printing start position is the horizontal position on the page

where the printer starts printing. If the printout appears too for

the left or right on the page, you can use this function to adjust

the printing start position.

Follow these steps to adjust the printing start position:

Note:

❏ Your printing start position setting remains in effect until you

change it, even if you turn off the printer.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 115 116

No comments

Epson PLQ-20M User's Guide Page 33