Epson Stylus Color II Ink Jet Printer Troubleshooting Guide

Printer SpecificationsPrinting Printing method: On-demand ink jetNozzle configuration: 64 monochrome (black) nozzles 60 color (cyan, magenta, yellow)

5. Before you load paper, make sure the printable surfacefaces up. For coated papers, the printable side is whiterthan the other side. For glossy pape

You can clean one or both print heads. Each cleaning cycletakes about one minute. During the cleaning cycle, thecarriage moves and you can hear the pr

3. Carefully clean away loose dust and dirt with a soft brush.4. Clean the exterior with a soft cloth dampened in mild soap.5. To clean ink out of the

Printable area:Single sheetsEnvelopesA The minimum top margin is 0.12 inch (3.0 mm).BL The minimum left margin is 0.12 inch (3.0 mm).BR The minimum r

Environmental Temperature: Operation 50 to 95°F (10 to 35°C)Storage* 4 to 140°F (20 to 60°C)1 month at 104°F (40°C)120 hours at 140°F (60°C)Humidity:

Control Panel The printer’s control panel contains lights for displaying theprinter status and buttons for controlling certain functions, asdescribed

Load/Eject + Print Mode + POWER switchWhen connected to a PC, prints a page containing ahexadecimal representation of the data sent to the printer(hex

First remove the transportation screw securing the print headto the carriage. Flip down the output tray and lift up theprinter cover. Loosen the trans

8. Push down the ink cartridge clamps until they lock in place.cCaution:Once you install the ink cartridges, do not open the clampsor remove the cartr

Calibrating with a PC1. If you did not install the Bi-D Calibration Utility on your hard disk, insert the Windows printer driver diskette inyour compu

The paper thickness lever on the right side of the sheet feederhas two settings: plain paper and thick paper. Set the lever tothe position that best s